Nanofiber collagen · Made in Korea

The collagen film that melts into skin in 10 seconds.

99.86% New Zealand marine collagen, spun into nanofiber film with U.S.-patented technology. Mist it, it absorbs into skin. No overnight mask. No residue.

4.8from 700+ verified reviews across BRIGHCA products700+ reviews across BRIGHCA
99.86%
Collagen film
10 sec
To melt, not overnight
Korea
Formulated & made
30 days
Trial Set guarantee (U.S.)

The Melt

3-Step Collagen Routine3-STEP ROUTINE · 60 SEC

Powered by U.S.-patented DermaLayr™ nanofiber technology. The fibers are about 300 times thinner than a human hair and melt on contact with the collagen mist.

1 · Mist

4 sprays on the area4 sprays

2 · Melt

Place, press, peel the cover, mist againPeel, mist again

3 · Seal

Seal it in with creamFinish with cream

Why not overnight?

Collagen, reinvented: 30 layers of nanofiber collagen that melts instantly on wet skin.

 
Overnight hydrogel mask
BRIGHCA film
Time on skin
3–4 hours to overnight
10 seconds to melt · 60-second routine
When to use
Only when you can commit 3+ hours
Morning or night, even under makeup
Technology
Gel sheet that sits on skin
U.S.-patented DermaLayr™ nanofiber
Collagen form
Collagen mixed into water and gel
The film itself: 99.86% collagen + 0.14% hyaluronic acid

The science, briefly

Collagen is a big molecule. Nanofiber is how it gets in.

NanoLayr in New Zealand spins premium marine collagen into nanofibers about 300 times thinner than a human hair, using U.S.-patented DermaLayr™ technology. In testing, the film system showed +226.72% skin absorbance vs. mist alone, plus 76.1% elasticity restoration and 109.3% moisturizing improvement after one use.*

+85.25%
deeper absorption (3D Raman)*
−19.1%
visible smile lines after one use*
−21.2%
water loss in 2 weeks: a stronger moisture barrier*
Read the studies

*Instrumental testing on DermaLayr™ Marine+ collagen film technology (n=20) by the Korea Institute of Dermatological Sciences and P&K Skin Research Center, as used in a Korean collagen film product. Not a BRIGHCA-branded clinical study. Individual results vary.

Choose your start

Three ways in. Most people start with the trial.

Full routine · full-size set
Anti Aging Collagen Skincare Set with Nanofiber Collagen Film for Lifting, Firming, Tightening, Brightening and Hydrating

Melting Collagen System

24 films + full-size mist + full-size cream.

$118or $99 subscribed
ADD TO CART
Refill · choose your area
Brighca Melting Collagen Film Refill

Collagen Film Refills

Eyes & smile lines · Cheeks · Forehead & neck · Mix.

from $28from $3.50 per treatment
CHOOSE AREA

Questions

Before you try it

What is "nanofiber collagen"?

Collagen spun into fibers about 300 times thinner than a human hair, then layered into a lightweight film. Because the fibers are so fine, the film melts on contact with mist and absorbs into skin, instead of sitting on the surface like a cream.

Why a film instead of a collagen cream?

Collagen is a large molecule, so in creams it mostly stays on the surface, and typical creams contain under 4% collagen. BRIGHCA's film is 99.86% collagen, up to 20x more than typical creams, in a nanofiber form that melts into skin. In testing, the film system showed +226.72% skin absorbance vs. mist alone.*

*Instrumental testing on DermaLayr™ Marine+ collagen film technology (n=20) by the Korea Institute of Dermatological Sciences and P&K Skin Research Center, as used in a Korean collagen film product. Not a BRIGHCA-branded clinical study. Individual results vary.

Does it really melt? Is there any residue?

Yes. Mist your skin, place the film, peel off the thin cover and mist again: the collagen melts into skin in about 10 seconds, with no visible residue and nothing to rinse off.

How is it different from a sheet mask?

A sheet mask is fabric soaked in serum that you leave on, then peel off and throw away. BRIGHCA's film is made of collagen itself: it melts into skin in about 10 seconds, so there's no sheet to wait out or remove.

How long does the routine take?

About 60 seconds: Essence Mist → Film → Revival Cream. No overnight wear and no waiting, so you can go straight to makeup or to bed.

When will I see a difference?

In testing, after just one use: up to 19.1% fewer visible smile lines, up to 36.6% visible lifting and 109.3% moisturizing improvement. After two weeks: 21.2% less trans-epidermal water loss, a sign of a stronger moisture barrier.*

*Instrumental testing on DermaLayr™ Marine+ collagen film technology (n=20) by the Korea Institute of Dermatological Sciences and P&K Skin Research Center, as used in a Korean collagen film product. Not a BRIGHCA-branded clinical study. Individual results vary.

Where does the collagen come from?

From premium New Zealand marine collagen, spun into nanofiber with U.S.-patented DermaLayr™ technology by NanoLayr in Auckland. Every BRIGHCA product is made in Korea.

Will it sting or tingle?

The film and mist are formulated to be gentle; the safety data sheet lists no hazardous ingredients and describes the products as non-irritating under intended use. Some people feel a light cooling as the film dissolves.

How often should I use the film?

It depends on your goal. For Maintenance Care, use the film every 2–3 days. For Intensive Care, use it every day. There's no set time of day: some customers like it in the morning before a special occasion, for a smooth, refined feel under makeup, while others prefer it at night as part of their bedtime routine. Whenever you use it, follow the same order: Essence Mist → Film → Revival Cream.

How does the 30-day guarantee work?

30-Day First-Order Guarantee (U.S. only): Try your first Trial Set. If you're not happy within 30 days of delivery, email hello@brighca.com — even if it's opened, send back the remaining product and we'll refund the full product price. One per customer. Return shipping is not refunded. All other orders follow our standard return policy.